Zoom image

Nite Site Viper

  • $650
  • sale
    33% off
Old price: $975 , you save $325
  • 33% off
  • SKU

Viper - for the up-close and personal night hunter

The Viper is designed to be the most affordable, high quality night vision system on the market for short-range distances. It achieves this using a powerful infrared illuminator (invisible to people and animals) to literally illuminate the target area immediately in front of where the rifle scope is aiming, allowing clear target identification up to 100 metres (110 yards) away. The infrared image is then captured through the rifle scope by a compact digital camera unit attached to the scope’s eyepiece and then played back live to the hunter via the unit’s integral 3.5 inch LCD screen. A video out jack enables recording of all night hunting activities.

Like all NiteSite products, the Viper utilises infrared illumination in a unique way, making it more affordable, reliable and user friendly than traditional light amplification technologies, delivering crisp, ultra-clear night vision, regardless of ambient light conditions.


Specifications at a glance

  Identification Range: 100 meters (110 Yards)
  Usable Calibre: Any
  Weight (excluding battery): 418g 
  Operational run time: Up to 7.5 hours 
  IR Frequency: 850nM
  IR LED’s: 1
  Display screen: 3.5 inch
  Operating Temperature: -20° to 60° (-4°F to 140°F)
  Video output: 3.5mm 4 pin jack
  Water resistant

*Range subject to individual optics / weather conditions


Every new NiteSite Viper comes with the following:

Heavy duty field carry case

1 x Carry Case. A robust carry case, fully padded with laser cut high-density ergonomic foam, makes transporting easy and ensures all components are held firmly and are heavily protected from the inevitable knocks the case will endure in the field. Large clasps make unlocking the case easy in night vision conditions.

Illuminator module and viewing screen

1 x Illuminator module. The scope mounted module houses 1 powerful (IR) illuminator delivering a range of up to 100m. An ergonomic ‘dimming’ knob allows accurate control of the illumination power to reduce flare for closer range targeting. The hooded front has an inset protective lens cover. The rear of the module features a 3.5 inch LCD viewing screen.

Connection to the camera unit is via a 90 degree male three pin jack plug and cable. The base features a patented ‘T’ bracket that connects securely to the Anti recoil clamps ‘T’ slot.

Digital IR camera module

1 x Camera module. The rugged module houses a colour infrared (IR) frequency camera 1.0 Lux 600TVL 1/3 CCD CMOS sensor (PAL or NTSC) 4:3 ratio. Audio and video (AV) output allows external connection to a recording device via a 3.5mm four pin socket (PAL or NTSC depending on your region). A large push button on/off switch is located on the rear face of the module for easy night operation.

Lithium-ion battery

1 x battery. The Viper is supplied with a 1.5Ah lithium-ion polymer scope mounted battery with adjustable Velcro fastening.

Battery charger

1 x 12 volt lithium-ion charger with charging indicator. Red light indicates the battery is charging. The green light indicates the battery is fully charged. Always use the correct charger supplied with the NiteSite battery product.

Multi diameter scope sleeves

2 x scope sleeves. 35mm or 40mm diameter rubber sleeves provide a secure, stable connection from the scope’s ocular to the camera unit. The heavy duty rubber construction is flexible enough to stretch over most rifle scope eyepieces although the first application of the scope sleeve over larger diameter eyepieces (44mm plus) can be assisted by softening the sleeve in hot water.

Multi diameter scope clamps

2 x scope clamps. 25mm and 30mm diameter clamps are included enabling mounting to most rifle scope body tubes. Larger scope clamp sizes are also available in 32mm and 34mm for bigger diameter scope body tubes.

Anti-recoil clamp

1 x adjustable anti-recoil clamp. The removable plastic clamp connects to the top of the scope clamp and ensures that the illuminator module stays firmly in the ‘T’ slot even during the most powerful recoil actions.

Anti-glare filters

1 x pack of five filters. Adhesive screen filters reduce screen glare to suit your environment and personal preferences. Multiple anti-glare filters can be used, progressively darkening the screen with each filter applied.

Instruction booklet and 2 year warranty card

1 x Instruction booklet. Designed to help you get the most from your NiteSite. It covers all aspects of set up, operation and care of your equipment.

1 x 24 month guarantee card. Covers you against electrical and mechanical breakdown. Note: Battery packs are guaranteed for 12 months.

Customers who bought this product also bought
Drop items here to shop
Product has been added to your cart