Maximum versatility and advantage for the night hunter
The WOLF is the perfect night vision unit for any hunter, delivering high quality, clear night vision through any day vision rifle scope. It achieves this using three powerful infrared illuminators (invisible to to people and animals) to literally illuminate the target area immediately infront of where the rifle scope is aiming, allowing clear target identification up to 300 metres (328 Yards) away. The infrared image is then captured through the rifle scope by a compact video recording unit attached to the scope’s eyepiece and then played back live to the hunter via the unit’s integral 3.5 inch LCD screen. A video out jack enables recording of all night hunting activites.
Like all NiteSite products, the WOLF utilises infrared illumination in a unique way, making it more affordable, reliable and user friendly than traditional light amplification technologies, delivering crisp, ultra-clear night vision, regardless of ambient light conditions.
Quick and easy to fit to any day scope
The true beauty of a NiteSite is that it converts any day scope (there’s no need to remove it) into a powerful night vision system that is quick and simple to set up. Indeed, from opening the carry case to hunt ready status takes just 60 seconds once you are familiar with the set up. All NiteSites are equipped with adaptable fittings that enable mounting onto virtually any make and size of scope and there is no need to re zero or adjust your scope in any way. Just mount the unit, switch on and you’re ready to shoot. Simple as that.
NiteSite Wolf Power+
Identification range: 300 metres (330 yards)*
Usable calibre: Any
Net weight (excluding battery): 440g
Operational run time: Up to 25 hours
IR Frequency: 850nM l IR LED’s: 3
Display screen: 3.5 inch
Operating Temperature: -20ºC to 60ºC (-4ºF to 140ºF)
Video output: 3.5mm 4 pin jack
*Range subject to individual optics / weather conditions
Every new NiteSite Wolf Power+ comes with the following:
Heavy duty field carry case
1 x Carry Case. A robust carry case, fully padded with laser cut high-density ergonomic foam, makes transporting easy and ensures all components are held firmly and are heavily protected from the inevitable knocks the case will endure in the field. Large clasps make unlocking the case easy in night vision conditions.
Illuminator module and viewing screen
1 x Illuminator module. The scope mounted module houses 3 powerful (IR) illuminators delivering a range of up to 300m. An ergonomic ‘dimming’ knob allows accurate control of the illumination power to reduce flare for closer range targeting. The hooded front has an inset protective lens cover. The rear of the module features a 3.5 inch LCD viewing screen.
Connection to the camera unit is via a 90 degree male three pin jack plug and cable. The base features a patented ‘T’ bracket that connects securely to the Anti recoil clamps ‘T’ slot.
Digital IR camera module
1 x Camera module. The rugged module houses a colour infrared (IR) frequency camera 1.0 Lux 600TVL 1/3 CCD CMOS sensor (PAL or NTSC) 4:3 ratio. Audio and video (AV) output allows external connection to a recording device via a 3.5mm four pin socket (PAL or NTSC depending on your region). A large push button on/off switch is located on the rear face of the module for easy night operation.
1 x battery. The Wolf is supplied with a 1.5Ah lithium-ion polymer scope mounted battery with adjustable Velcro fastening strap.
The Wolf Power+ is supplied with a stock mounted 5.5Ah lithium-ion polymer battery that is housed in a separate battery pouch.
Battery stock pouch
1 x stock pouch. The Wolf Power+ is supplied with a sturdy weather resistant pouch that snugly holds the larger 5.5Ah battery. The pouch is attached to either side of the rifle stock with a wide elastic belt and Velcro fasteners.
1 x 12 volt lithium-ion charger with charging indicator. Red light indicates the battery is charging. The green light indicates the battery is fully charged. Always use the correct charger supplied with your NiteSite battery.
Multi diameter scope sleeves
2 x scope sleeves. 35mm or 40mm diameter rubber sleeves provide a secure, stable connection from the scope’s ocular to the camera unit. The heavy duty rubber construction is flexible enough to stretch over most rifle scope eyepieces although the first application of the scope sleeve over larger diameter eyepieces (44mm plus) can be assisted by softening the sleeve in hot water.
Multi diameter scope clamps
2 x scope clamps. 25mm and 30mm diameter clamps are included enabling mounting to most rifle scope body tubes. Larger scope clamp sizes are also available in 32mm and 34mm for bigger diameter scope body tubes.
1 x adjustable anti-recoil clamp. The removable plastic clamp connects to the top of the scope clamp and ensures that the illuminator module stays firmly in the ‘T’ slot even during the most powerful recoil actions.
1 x pack of five filters. Adhesive screen filters reduce screen glare to suit your environment and personal preferences. Multiple anti-glare filters can be used, progressively darkening the screen with each filter applied.
Instruction booklet and 2 year warranty card
1 x Instruction booklet. Designed to help you get the most from your NiteSite. It covers all aspects of set up, operation and care of your equipment.
1 x 24 month guarantee card. Covers you against electrical and mechanical breakdown. Note: Battery packs are guaranteed for 12 months.