MDT DRT Chassis System

The MDT DRT Chassis System is a rifle stock and chassis component from MDT (Modular Driven Technologies), makers of precision rifle chassis systems, stocks and accessories. Available by colour (FDE, Black).

Dead Right There. That's the only outcome you're hunting for tonight.

No wind. No distractions. Just the cold, dark night and the faint shape of a hog working the fence line two hundred yards out, its signature ghosting through your thermal. You've been sitting on this field for three hours, and your legs are stiff, but the rifle at your feet hasn't asked anything of you all night.

Get closer, and the ground turns to broken pasture and deadfall. A heavy rig punishes you here, every extra pound another reason to second-guess the stalk. The DRT doesn't. Magnesium construction keeps it light for the walk in, then locks down hard the second you settle into position. Fold it for the fence-line crossing. Drop into a tripod when the shot presents itself.

Behind the glass, the white heat washes in and everything else drops away. No noise. No stiff knees. Just the reticle and the shape moving through your scope. The DRT's NV bridge keeps your clip-on running true to that reticle, so the crosshair and the signature are always tracking on the same spot. There's no guessing here. You settle the shot, and you send it.

Dead Right There. Every time.

Night Hunting, Dead-On

The full-length 20 MOA NV bridge keeps your clip-on locked in true alignment with your riflescope. A rigid forend and bridge system keep that alignment from wandering under pressure, so your sight picture stays clean and your zero stays consistent in the dark.

More Ground, More Opportunity

A heavy chassis wears on you long before the shot ever presents itself, and tired muscles mean an elevated heart rate, shakier hold, and a harder time settling the crosshair right when it counts. Magnesium construction holds the whole system to 3.2 lbs without giving up the strength you need behind the glass, so you're steady and settled when the moment finally comes, not gassed from the walk in.

Zero In. Zero Shift

Magnesium structure, an aluminum ARCA rail and NV bridge reinforce the forend against the flex that causes point of impact shift. Loaded on a bipod, braced on a tripod, or shooting off a bag, the zero holds.

Never Lose Sight Of The Drop

A low bore axis design cuts the leverage that drives muzzle rise, keeping your sight picture stable through recoil. You stay in the glass, spot the impact, and get back on target fast for a follow-up.

Every Mount Gets Its Own Lane

A bolted-on ARCA rail, M-LOK mounting points, and offset Picatinny rail give your tripod, rangefinder, and IR laser their own dedicated space. Nothing fights for room when it's time to move fast.

Cuts weight without giving up structural rigidity.

Integrated Adjustable Friction Folder

Folds for transport, opens fast, and locks solid for the shot.

Keeps clip-on night vision co-witnessed with your optic.

Integrated Barricade Stop

Locks into your support bag without putting pressure on the magazine.

Resists flex under bipod, tripod, or bag pressure.

MULTI-MATERIAL CONSTRUCTION (MAGNESIUM, ALUMINUM, TITANIUM, CARBON FIBER)

Each material is placed where its strength-to-weight ratio matters most.

Dials in magazine fit and feed.

Covers the bolt handle when folded for a smaller footprint.

Keeps a loaded magazine secured in the field.

Adjusts to match your cheek weld and eye height.

Adds grip control without adding weight.

Multifunction Arca Rail With Arcalock & Rrs Lock

Compatible with both ARCALOCK (Area 419) and RRS Lock tripod/bipod interfaces.

Adjusts from 12" to 14.25" to fit the shooter.

Offset Picatinny Rail Accessory Mount

Mounts laser rangefinders and other picatinny accessories clear of the ARCA interface.

Adds M-LOK mounting points along the forend.

Positions thumb support to the shooter's grip.

Magnesium (Chassis Body & Buttstock)

Aluminum (NV Bridge & ARCA Rail)

Titanium (LOP Pins, LOP Clamp, Action Screws)

Chassis, Buttstock, NV Bridge, CF Grip: 3.2Lbs / 51.2oz

1.15” Cheekriser Height Adjustment

Max Barrel Diameter

Allows up to 1.25" straight contour Barrels (With included NV Bridge Spacer Kit)

Muzzle diameter must be less than 1.1"

Barrel length must be more than 15" to clear the end of the NV bridge

Use a 20 MOA scope base/integrated rail

For larger barrel diameters up to 1.25" straight MAX.

Picatinny rail on the NV bridge will not be in-line with the scope base. Not recommended for NV/Thermal use.

Higher scope rings than 1.5" may be required to clear the NV bridge -OR- a scope with a smaller objective lens diameter (1.700"+ height recommended)

Magnesium Chassis Base With Integrated Folding Buttstock

Carbon Fiber Vertcal Grip GEN2

Aluminum Offset Picatinny Rail

Adjustable M-LOK Thumb Rest

All Required Installation Hardware

6-32 x 0.375in FHCS SS BO TD (T10) - 15in-lbs

NV Bridge Attachment Screws

10-32 x 0.375in FHCS SS BO TD (T25) - 30in-lbs

RSS Dovetail Attachment Screws

Adjustable Folder Retention

0.25-28 x 0.375in BHCS AS SBN TD (T25) - 30-35in-lbs (65in-lbs MAX) (or per user’s preference)

8-32 x 0.25in SHCS SS BO HD (3/32” Hex) - 15 in-lbs

8-32 X 0.188IN CPSES HD 18-8 SS (6.5 turns of engagement)

Adjust Magazine Release Lock force

10-32 x 0.5in BHCS SS BO HD (1/8" Hex) - 20in-lbs

0.25-20 x 0.1875in Brass Tip Set Screw

Cheekriser height adjustment

10-32 x 0.75in BHCS SS BO HD (5/32” Hex) - 20in-lbs

10-32 x 0.75in SHCS SS HD BO (1/8” Hex) - 20in-lbs

LOP Rod attachment (in buttpad)

0.25-28 x 0.75in BHCS HD TI PLN (5/32” Hex) - 35in-lbs

10-32 x 0.75 BHCS HD TI PLN (5/32” Hex) - 35in-lbs

0.25-28 x 1.5in SHCS HD TI PLN (3/16in Hex) - 65in-lbs

0.25-28 x 0.625in SHCS HD TI PLN (3/16in Hex) - 65in-lbs

Key Features

• Skeletonized magnesium chassis & buttstock
• Skeletonized 20 moa nv bridge
• Structurally designed rigid forend
• Adjustable mag latch with delrin dowel pins
• Fold-over bolt design
• Lockable mag latch
• Integral adjustable cheekpiece
• Textured adjustable carbon fiber vertical grip
• Adjustable length of pull
• M-lok compatible forend
• Adjustable m-lok thumbshelf
• Specifications

Specifications

• NV Bridge Spacers: 0.08Lbs / 1.3oz
• NV Bridge: 0.37Lbs / 5.92oz
• Offset Pic Rail: 0.2Lbs / 3.2oz
• Thumbscrew: 0.02Lbs / 0.32oz
• MIN: 12” (305mm)
• MAX: 14.25” (362mm)
• From recoil lug: 14.93"
• Minimum recommended scope ring height: 1.5"
• Colour options: FDE, Black